Progressive Scan Progressive scanning eliminates the blurring that oftern occurs with interlaced scanning, to produce high-quality images. SSL Support Recorded data is sent in encrypted form, making it very difficult for someone else to “eavesdrop” on the network. Motion Detection Function This function detects changes by reacting to a camera threshold or sensitivity that is set in advance on the PC. Captured images can also be stored temporarily in the camera5 or sent to you be email6 or FTP data transfer7. Recording Program8 Video data can be downloaded to a PC using optional software. In stores, this allows for more detailed monitoring of customer behavior, and of employee attitudes toward customers, information that cannot be obtained from still images alone. Easy PoE Supply The power is supplied through the Ethernet cable, so the network camera can be installed on the ceiling very easily since the additional work for the power outlet is not required.

Two-Way Voice Communication An external microphone and amp-equipped speaker, both optional, enable two-way voice communication3 (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image. CCD Sensor for Enhanced Image Expression This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second4 for smoother displays of moving images. Record Directly onto SD Cards The BB-HCE481A features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately). * Voices cannot be recorded. Simple Ethernet Connection – No PC Required Our cameras are attached through an Ethernet connection (or router) and power source, you don’t need a computer at each location you want monitored. Each camera has a built-in Web server with IP address. To view the camera’s images on a PC,

CCD Sensor for Enhanced Image Expression This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second3 for smoother displays of moving images. Record Directly onto SD Cards The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately). Control the Camera Remotely Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 350 Pan (left & right) movement and 210 Tilt (up & down) movement available. You can also assign a “Home Position” that allows you to return the camera to a pre- designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen. Sensor Recording and Image Alerts With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Do you sometimes worry about things at home while you’re at work or on vacation? Panasonic network cameras let you monitor the entrance or garage of your house over the Internet from wherever you are. And you can choose the video format to match the Internet connection and your viewing needs (Motion JPEG or Mpeg-4). Let Panasonic network cameras keep an eye on things – anytime, anywhere – so you can relax and enjoy yourself.

Just Plug It In and Play This network camera is truly easy to install and use in most cases. With industry standard automatic configuration (UPnP), the camera and your router or PC will automatically decide the best settings, allowing you to access your camera without any complicated setup. Once connected, using a simple web browser, just enter in your free, permanent web address, which comes with the camera, and you’re done! It’s that simple. Sensor Recording and Email Alerts With the built-in motion sensor, the camera can be set to record and/or notify you by email when someone enters the room.

When You Need a Little Privacy With the built-in Privacy mode, your privacy is protected by simply pressing a button. An indicator on the front of the camera turns red, and you know at a glance that the camera is now only accessible by you4. The camera can also be set up to show a green light when the camera is being accessed. Sensor Recording and Email Alerts With the built-in heat sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room. Record Only What You Want to Record The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it’s possible for the camera to email5 or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image. Create Your Own Free Web Address The FREE Viewnetcam.com service allows you to create a personal Web address (e.g. http://bob.viewnetcam.com) so you can view your camera’s live images on the Internet. Access your Panasonic Network Camera live from virtually any Internet connection point around the world!