Outdoor Ready The splash-resistant body* expands the scope of applications by letting you install the camera outside, like on house, garage or store eaves. * IPX4 (IEC 60529 standard) equivalent splash-resistance Control Wide-angle Lens The use of a 73wide-angle lens lets you monitor a wide area in a single view. The coverage can be increased even more by combining pan and tilt operation. Connect SSL support Image/voice data is sent in encrypted form, making it very difficult for someone else to “eavesdrop” on the network. Monitor Simultaneous MPEG-4*1 and JPEG Cameras simultaneously send MPEG-4*1 images in three resolutions (VGA*2, QVGA, and QSIF_SP), and JPEG images in the same three resolutions in favor motion, standard, and favor clarity image-quality types. MPEG-4 is recommended for viewing smooth motion images, and JPEG is recommended for recording higher quality images.

See There When You Can’t Be There™ Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you’d like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1 and requires no additional software for the PC that you’re viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera. Bring Any Image Right Up Close Equipped with a 42x zoom function (a 21x optical zoom and a 2x digital zoom2), the camera lets you zoom in and out in a total of 12 steps (10-step optical zoom and 2-step digital zoom) to view objects that are close or far away. Record Directly onto SD Cards The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately).

See There When You Can’t Be There™ Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you’d like to keep an eye on things, with no PC required at the location after initial setup. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1 and requires no additional software for the PC that you’re viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera. Any Image Bright and Clear The 1280×1024 resolution captures stunning images for crisp, full-screen viewing. The image refreshing speed (maximum) has been increased to 30 images per second2 for smoother displays of moving images.

Can Be Used Outdoors This model was designed for outdoor operation, and meet both IPX4 and UL6500 standards of outdoor equipment. They operate down to -4F and up to 122F, and are splash resistant for wet-weather operation. Two-Way Voice Communication Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication2 (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image. CCD Sensor for Enhanced Image Expression This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second3 for smoother displays of moving images. Record Directly onto SD Cards The BB-HCM371A features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately). * Voices cannot be recorded. Simple Ethernet Connection – No PC Required Our cameras are attached through an Ethernet connection (or router) and power source, you don’t need a computer at each location you want monitored. Each camera has a built-in Web server with IP address. To view the camera’s images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address(password optional).

See There When You Can’t Be There™ Place this plug-and-play camera in your home, office, vacation home or almost anywhere else you’d like to keep an eye on things, with no PC required at the location. The camera can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1 and requires no additional software for the PC that you’re viewing it on. All of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera. Two-Way Voice Communication Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication3 (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera.

Do you sometimes worry about things at home while you’re at work or on vacation? Panasonic network cameras let you monitor the entrance or garage of your house over the Internet from wherever you are. And you can choose the video format to match the Internet connection and your viewing needs (Motion JPEG or Mpeg-4). Let Panasonic network cameras keep an eye on things – anytime, anywhere – so you can relax and enjoy yourself.

Two-Way Voice Communication An external microphone and amp-equipped speaker, both optional, enable two-way voice communication3 (transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image. CCD Sensor for Enhanced Image Expression This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second4 for smoother displays of moving images. Record Directly onto SD Cards The BB-HCE481A features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately). * Voices cannot be recorded. Simple Ethernet Connection – No PC Required Our cameras are attached through an Ethernet connection (or router) and power source, you don’t need a computer at each location you want monitored. Each camera has a built-in Web server with IP address. To view the camera’s images on a PC,

CCD Sensor for Enhanced Image Expression This camera features a CCD (Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed (maximum) has been increased to 30 images per second3 for smoother displays of moving images. Record Directly onto SD Cards The camera features an SD Memory Card slot for recording images captured by the network camera directly onto an SD Memory Card (sold separately). Control the Camera Remotely Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 350 Pan (left & right) movement and 210 Tilt (up & down) movement available. You can also assign a “Home Position” that allows you to return the camera to a pre- designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen. Sensor Recording and Image Alerts With the built-in sensor, the camera can be set to record and/or notify you when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

When You Need a Little Privacy With the built-in Privacy mode, your privacy is protected by simply pressing a button. An indicator on the front of the camera turns red, and you know at a glance that the camera is now only accessible by you4. The camera can also be set up to show a green light when the camera is being accessed. Sensor Recording and Email Alerts With the built-in heat sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room. Record Only What You Want to Record The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it’s possible for the camera to email5 or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image. Create Your Own Free Web Address The FREE Viewnetcam.com service allows you to create a personal Web address (e.g. http://bob.viewnetcam.com) so you can view your camera’s live images on the Internet. Access your Panasonic Network Camera live from virtually any Internet connection point around the world!